Dynamic Vlan Port Configuration - TRENDnet TL2-E284 User Manual

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
Figure 35 – Layer2 Management > Dynamic VLAN > Dynamic VLAN Global Configuration
Parameter
Garp System Control
Dynamic VLAN Status
Click Apply to submit the changes.

Dynamic VLAN Port Configuration

This page is to configure dynamic VLAN settings on switch ports.
Parameter
Port
Dynamic VLAN Status
Restricted VLAN
Registration
6-7
Description
Choose Start to enable GARP function, and Shutdown to disable it. It is
needed for using dynamic VLAN function. Default is Start.
To set the status of dynamic VLAN function from Enabled or Disabled.
Default is Disabled.
Figure 36 – Layer2 Management > Dynamic VLAN > Port Settings
Description
Specify the switch port to be configured.
To set the status of dynamic VLAN function from Enabled or Disabled.
To enable/disable the restricted VLAN on an interface.