Shutdown Port-Channel; Show Etherchannel - TRENDnet TL2-E284 User Manual

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
Example
Command History

shutdown port-channel

Command
Default Settings
Command Modes
User Guidelines
Example
Command History

show etherchannel

Command
Syntax Description
Command Modes
30-5
switch(config-if)# lacp wait-time 0
Version History
1.00.001 This command was introduced
To shutdown the port channel group.
shutdown port-channel
no shutdown port-channel
Active
Global Configuration Mode
Using no form to reactivate the port channel group.
switch(config)# shutdown port-channel
Version History
1.00.001 This command was introduced
To display the information of port channel groups.
show etherchannel
load-balance | port | port-channel | summary | protocol}]
channel-grou
Specify the information of which port channel group to
p-number
display.
detail
Displays the detailed information of the etherchannel.
load-balance
Displays the load-balance or frame-distribution scheme
among ports in the port channel of the etherchannel.
port
Displays the port information of the etherchannel.
port-channel
Displays the port-channel of the etherchannel.
summary
Displays summary of the etherchannel.
protocol
Displays protocol used in the etherchannel.
Privileged EXEC Mode
[<channel-group-number> { detail |