TRENDnet TL2-E284 User Manual page 236

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
Command
Syntax Description
Default Settings
Command Modes
User Guidelines
Example
Command History
33-2
mac-address-table static multicast <aa:aa:aa:aa:aa:aa> vlan
<vlan-id(1-4094)> [recv-port <interface-type> <interface-id>]
interface
[<interface-type> <0/a-b,0/c,...>] [port-channel <a,b,c-d>]])
[forbidden-ports
[<interface-type> <0/a-b,0/c,...>] [port-channel <a,b,c-d>]])
[status { permanent | deleteOnReset | deleteOnTimeout }]
no mac-address-table static multicast <aa:aa:aa:aa:aa:aa> vlan
<vlan-id(1-4094)> [recv-port <interface-type> <interface-id>]
aa:aa:aa:aa:aa:aa
vlan vlan-id(1-4094)
recv-port
interface-type
interface-id
interface
interface-type
0/a-b,0/c,...
port-channel a,b,c-d
forbidden-ports
interface-type
0/a-b,0/c,...
port-channel a,b,c-d
status
permanent
deleteOnReset
deleteOnTimeout
Default Status – Permanent
Global Configuration Mode
1. Using no form to delete a configured entry.
2. Multiple member port is allowed.
switch(config)#
01:00:5e:11:22:33 vlan 1 interface fa 0/1 fa 0/2 status
permanent
Version History
1.00.001 This command was introduced
([<interface-type>
([<interface-type>
MAC address of the static multicast.
VLAN of the static multicast.
The received port of the static multicast.
Interface-type including Fa (Fast Ethernet) or Gi
(Gigabit Ethernet).
Interface-id is slot/port number.
The member interfaces of the static multicast.
Specify the member port type and ID.
Interface-type including Fa (Fast Ethernet) or Gi
(Gigabit Ethernet).
Interface-id is slot/port number.
Specify the member port channel ID.
The forbidden interface of this static multicast.
Specify the forbidden port type and ID.
Interface-type including Fa (Fast Ethernet) or Gi
(Gigabit Ethernet).
Interface-id is slot/port number.
Specify the forbidden port channel ID.
Specify the status of this static multicast.
The static multicast will keep alive.
The static multicast will be deleted after switch
reset.
The static multicast will be deleted when aging time
out.
mac-address-table
<0/a-b,0/c,...>]
<0/a-b,0/c,...>]
static multicast