Ip Arp Max-Retries; Arp - TRENDnet TL2-E284 User Manual

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
Note

ip arp max-retries

Command
Syntax Description
Default Settings
Command Modes
User Guidelines
Example
Command History

arp

Command
Syntax Description
15-2
The IP address of Management VLAN interface must be assigned by a DHCP
server.
To set the maximum number of ARP request retries.
ip arp max-retries <value (2-10)>
no ip arp max-retries
value (2-10)
Number of ARP request retries.
3
Global Configuration Mode
The no form resets the number of retries to default value.
switch(config)# ip arp max-retries 4
Version History
1.00.001 This command was introduced.
To add a static entry in the switch ARP table.
arp <ip address> <hardware address> {Vlan <vlan-id(1-4094)> |
<interface-type> <interface-id> | Linuxvlan <interface-name>|
Cpu0}
no arp <ip address>
ip address
hardware address
Vlan
vlan-id(1-4094)
interface-type
interface-id
Linuxvlan
interface-name
Cpu0
IP address of the network node.
MAC address of the network node.
VLAN id
Interface type and id of the interface connects to the ARP
entry.
Interface-type including Fa (Fast Ethernet) or Gi (Gigabit
Ethernet).
Interface-id is slot/port number.
Interface name of Linux VLAN interface.
Out-of-band management interface.