Mailserver - TRENDnet TL2-E284 User Manual

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
Syntax Description
Default Settings
Command Modes
Example
Command History

mailserver

Command
20-2
ip-address
buffered size (1-200)
console
Facility local0~7
trap
level (0-7)
alerts
critical
debugging
emergencies
errors
informational
notification
warnings
on
Logging: Enabled
Console: Disabled
Timestamp: Enabled
Trap: Informational
IP address: None
Facility: Local0
Buffered: 50
Global Configuration Mode
switch(config)# logging console
Version History
1.00.001 This command was introduced
Specify the IP address of mail server to be used for sending the lemail alerts
messages. The no form resets the setting.
mailserver <ip-address>
no mailserver
IP address of the syslog server
The size of internal logging buffer
Enable logging to the console
Specifies the facility that is indicated in the
message. Possible values: local0, local1, local2,
local3, local4, local5, local 6, local7
Enable trap messages
Severity levels
Alert level: action must be taken immediately
Critical level: Critical conditions
Debug level: Debug messages
Emergency level: System is unusable
Error level: Error conditions
Informational level: Informational messages
Notification level: Normal but significant condition
Warning level: Warning conditions
Enable the syslog