Debug Dot; Debug Radius - TRENDnet TL2-E284 User Manual

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
debug dot1x
Command
Syntax Description
Default Settings
Command Modes
User Guidelines
Example
Command History

debug radius

Command
31-9
To enable the debug mode of 802.1X authentication.
debug dot1x {all | errors | events | packets | state-machine
| redundancy}
no debug dot1x {all | errors | events | packets | state-machine
| redundancy}
all
Displays all 802.1X debug messages.
errors
Displays error code debug messages
events
Displays event debug messages
packets
Displays packet debug messages
state-machine
Displays state-machine related debug messages
redundancy
Displays redundancy related debug messages.
Disable
Privileged EXEC Mode
Using no form to disable the debug mode.
switch# debug dot1x all
Version History
1.00.001 This command was introduced
To enable debug mode for RADIUS.
debug radius {all | errors | events | packets | responses |
timers}
no debug radius