Table of Contents
Advertisement
TRENDnet User's Guide
Accessing switch management interfaces
Access your switch web management page
Note: Your switch default management IP address
through the use of your Internet web browser (e.g. Internet Explorer®, Firefox®,
Chrome™, Safari®, Opera™) and will be referenced frequently in this User's Guide.
Throughout this user's guide, the term Web Configuration will be used to reference
access from web management page.
1. Open your web browser and go to the IP address http://192.168.10.200. Your switch
will prompt you for a user name and password.
2. Enter the user name and password. By default:
User Name: admin
Password: admin
Note: User Name and Password are case sensitive.
© Copyright 2018 TRENDnet. All Rights Reserved.
http://192.168.10.200
is accessed
System Info
View your switch status information
Switch Info
You may want to check the general system information of your switch such as firmware
version, boot loader information and system uptime. Other information includes
administration information, and System MAC Address IPv4 information.
1. Log into your switch management page (see
on page 7).
2. Click on Switch Info.
Switch Information
System Up For – The duration your switch has been running continuously without
a restart/power cycle (hard or soft reboot) or reset.
Runtime Image: The current software or firmware version your switch is running.
Boot Loader – The current boot loader version your switch is running.
Administration Information
System Name – Displays the identifying system name of your switch. This
information can be modified under the System section.
System Location - Displays the identifying system location of your switch. This
information can be modified under the System section.
System Contact – Displays the identifying system contact or system administrator
of your switch. This information can be modified under the System section.
TEG-S80ES
"Access your switch management
page"
7
Hide quick links:
Advertisement
Table of Contents
