TRENDnet TL2-E284 User Manual page 211

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
Command
Syntax Description
Default Settings
Command Modes
User Guidelines
Example
Command History
radius-server host
Command
31-3
dot1x local-database <username> password <password> permission
{allow | deny} [<auth-timeout (value(0-7200))>] [interface
<interface-type> <interface-list>]
no dot1x local-database <username>
username
password
password
permission allow
permission deny
auth-timeout
(value(0-7200))
interface
interface-type
interface-list
Permission – allow
Auth-timeout – 0
Interface – All ports
Global Configuration Mode
1. When the timeout vlaue is 0, the authenticator will use the re-authentication
period of the authenticator port
2. When create a user account without permission, auth-timeout and interface
values, system will assign default value to this account.
switch(config)#
trendnet123 permission deny
Version History
1.00.001 This command was introduced
To configure the details of RADIUS server.
radius-server host <ip-address> [timeout <1-120>] [retransmit
<1-254>] key <secret-key-string>
no radius-server host <ip address>
Specify the user name of a local database entry.
Specify the password of a local database entry.
Specify the user is allowed to access ports configured.
Specify the user is not allowed to access ports
configured.
Time interval between authentication attmpts.
Port list the 802.1X authentication can be applied.
dot1x local-database trendnet password