Snmp Community; Snmp Engineid - TRENDnet TL2-E284 User Manual

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
Command Modes
User Guidelines
Example
Command History

snmp community

Command
Syntax Description
Default Settings
Command Modes
Example
Command History

snmp engineid

17-3
Global Configuration Mode
Before configuring the access settings, the SNMP group has to be created first.
switch(config)# snmp access oper v2c read operv2readview write
operv2writeview notify operv2notifyview nonvolatile
Version History
1.00.001 This command was introduced
To create a SNMP community, and the no form removes the community.
snmp community
[{volatile | nonvolatile}]
no snmp community <CommunityName>
CommunityName
security SecurityName
volatile
nonvolatile
Community Index : NETMAN
Community Name : NETMAN
Security Name : none
Storage Type : Non-volatile
------------------------------
Community Index : PUBLIC
Community Name : PUBLIC
Security Name : none
Storage Type : Non-volatile
Global Configuration Mode
switch(config)# snmp community oper security none nonvolatile
Version History
1.00.001 This command was introduced
To configure the SNMP engine identifier of the switch
<CommunityName>
SNMP community name
Security name
Store in volatile memory
Store in nonvolatile memory
security <SecurityName>