Set Sntp Dst; Sntp Dst - TRENDnet TL2-E284 User Manual

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
Syntax Description
Default Settings
Command Modes
Example
Command History

set sntp dst

Command
Syntax Description
Default Settings
Command Modes
Example
Command History

sntp dst

Command
21-2
enable
Enables the SNTP.
disable
Disables the SNTP.
Disable
Global Configuration Mode
switch(config)# set sntp enable
Version History
1.00.001 This command was introduced
To enable/disable the Daylight Saving Time (DST) function of SNTP.
set sntp dst {enable | disable}
enable
Enables the DST function.
disable
Disable the DST function.
Disable
Global Configuration Mode
switch(config)# set sntp dst enable
Version History
1.00.001 This command was introduced
To configure the period of DST function.
sntp dst from {january | february | march | april | may | june
| july | august | september | october | november | december}
<day (1-31)> <hour (0-23)> <minute (0-59)> to {january |
february | march | april | may | june | july | august | september
| october | november | december} <day (1-31)> <hour (0-23)>
<minute (0-59)>