Chapter 18 Ssh Command; Ssh Command List; Ssh; Ip Ssh - TRENDnet TL2-E284 User Manual

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots

SSH Command List

ssh

Command
Syntax Description
Default Settings
Command Modes
Example
Command History

ip ssh

Command
18-1

ssh

ip ssh

debug ssh

show ip ssh
To activate the SSH server function on the switch. The no format is to turn it off.
ssh {enable | disable}
enable
To turn on the SSH server function.
disable
To turn off the SSH server function.
Enabled
Global Configuration Mode
switch(config)# ssh enable
Version History
1.00.001 This command was introduced
To configure the SSH server settings. The no format will cancel the settingand go
back to default value.
ip ssh {version compatibility | cipher ([des-cbc] [3des-cbc])
| auth ([hmac-md5] [hmac-sha1]) }
no ip ssh {version compatibility | cipher ([des-cbc] [3des-cbc])
| auth ([hmac-md5] [hmac-sha1]) }
Chapter 18
SSH Command