Show Ip Igmp Snooping; Show Ip Igmp Snooping Forwarding-Database - TRENDnet TL2-E284 User Manual

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
Command History

show ip igmp snooping

Command
Syntax Description
Command Modes
Example
Command History

show ip igmp snooping forwarding-database

Command
Syntax Description
Command Modes
User Guidelines
Example
32-9
Version History
1.00.001 This command was introduced
To display current settings of IGMP snooping function.
show ip igmp snooping [Vlan <vlan id>]
Vlan vlan id
Privileged EXEC Mode
switch# show ip igmp snooping
Snooping VLAN Configuration for the VLAN 1
IGMP Snooping enabled
IGMP configured version is V2
IGMP Operating version is V2
Fast leave is disabled
Snooping switch is configured as Non-Querier
Snooping switch is acting as Non-Querier
Query interval is 125 seconds
Version History
1.00.001 This command was introduced
To display the addresses information in IGMP forwarding database.
show ip igmp snooping forwarding-database [Vlan <vlan id>]
Vlan vlan id
Privileged EXEC Mode
System will display multicast addresses in FDB when executing the command
without a given VLAN parameter.
switch# show ip igmp snooping forwarding-database vlan 1
Vlan MAC-Address
---- -----------------
1 01:00:5e:7f:ff:64
Ports
-----
Fa0/9