TRENDnet TL2-E284 User Manual page 210

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
dot1x system-auth-control
Command
Default Settings
Command Modes
User Guidelines
Example
Command History
aaa authentication dot1x default
Command
Syntax Description
Default Settings
Command Modes
Example
Command History
dot1x local-database
31-2
To enable 802.1X authentication on the Switch.
dot1x system-auth-control
no dot1x system-auth-control
Disable
Global Configuration Mode
Using no form to disable the 802.1X authentication.
switch(config)# dot1x system-auth-control
Version History
1.00.001 This command was introduced
To choose local or RADIUS database for 802.1X authentication.
aaa authentication dot1x default { group radius | local}
group radius
Using the database on RADIUS server.
local
Using the local database.
Local
Global Configuration Mode
switch(config)# aaa authentication dot1x default group radius
Version History
1.00.001 This command was introduced
To create user information in local database.