Debug Vlan; Show Vlan - TRENDnet TL2-E284 User Manual

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots

debug vlan

Command
Syntax Description
Default Settings
Command Modes
User Guidelines
Example
Command History

show vlan

26-4
To enable the debug mode for VLAN.
debug vlan { global | [{fwd | priority | redundancy} [initshut]
[mgmt] [data] [ctpl] [dump] [os] [failall] [buffer] [all]]}
no debug vlan { global | [{fwd | priority | redundancy}
[initshut] [mgmt] [data] [ctpl] [dump] [os] [failall] [buffer]
[all]]}
global
Displays the global debug messages for multiple instances.
fwd
Displays the forwarding debug messages.
priority
Displays the VLAN priority debug messages.
redundancy
Displays the redundancy related debug messages.
initshut
Displays the initial and shutdown debug messages.
mgmt
Displays the management related debug messages.
data
Displays the data path debug messages.
ctpl
Displays the control plan debug messages.
dump
Displays the packet dump debug messages.
os
Displays the debug messages for all resources except buffer.
failall
Displays the all failure messages.
buffer
Displays the buffer debug messages.
all
Displays all debug messages.
Disable
Privileged EXEC Mode
Using no form the disable debug mode.
switch# debug vlan all
Version History
1.00.001 This command was introduced
To display the VLAN member port information and VLAN number.