Chapter 16 Ip Authorized Manager Command; Ip Authorized Manager Command List; Authorized-Manager - TRENDnet TL2-E284 User Manual

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
IP Authorized Manager Command

IP Authorized Manager Command List

authorized-manager

Command
Syntax Description
Default Settings
Command Modes
16-1

authorized-manager

show authorized-managers
To set an authorized administrator source IP address, and the services,
interfaces, or VLANs that it is allowed to visit.
authorized-manager ip-source <ip-address> [{<subnet-mask> | /
<prefix-length(1-32)>}] [interface [<interface-type <0/a-b,
0/c, ...>] [<interface-type <0/a-b, 0/c, ...>]] [vlan <a,b or
a-b or a,b,c-d>] [cpu0] [service [snmp] [telnet] [http] [https]
[ssh]]
no authorized-manager ip-source <ip-address> [{<subnet-mask>
| / <prefix-length(1-32)>}]
ip-source ip-address
<subnet-mask>
/ prefix-length(1-32)
interface-type
0/a-b, 0/c
vlan a,b or a-b
a,b,c-d
cpu0
service snmp
service telnet
service http
service https
service ssh
By default no authorized-manager ip-source is assigned. All services, vlan, and
interfaces are allowed for an authorized-manager but default expect for the
out-of-band management interface.
Global Configuration Mode
IP address of authorized manager
Subnet mask of the authorized IP address
Prefix length of the authorized IP address
Interface of the authorized administrator is
allowed to connected to
or
VLAN ID of the authorized administrator is
allowed to connected to
Out-of-band management interface.
SNMP service
Telnet service
HTTP (Web) service
HTTPS (SSL) service
SSH service
Chapter 16