Port-Channel Load-Balance - TRENDnet TL2-E284 User Manual

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
Syntax Description
Default Settings
Command Modes
User Guidelines
Example
Command History

port-channel load-balance

Command
Syntax Description
Default Settings
Command Modes
User Guidelines
Example
30-2
0-65535
Specify the value of LACP system priority.
32768
Global Configuration Mode
The system priority decides the standby or active links in a aggregation when the
number of member port exceeds the maximum number of the etherchannel that
Switch supported.
switch(config)# lacp system-priority 1
Version History
1.00.001 This command was introduced
To choose the load balance algorithm of the port-channel.
port-channel load-balance {src-mac | dest-mac | src-dest-mac|
src-ip |
[ <port-channel-index(1-65535)>]
no port-channel load-balance [ <port-channel-index(1-65535)> ]
src-mac
Hashing according to the source MAC address of the
packets.
dest-mac
Hashing according to the destication MAC address of the
packets.
src-dest-mac
Hashing according to the source and destication MAC
address of the packets.
src-ip
Hashing according to the source IP address of the packets.
dest-ip
Hashing according to the destication IP address of the
packets.
src-dest-ip
Hashing according to the source and destication IP address
of the packets.
port-channel-i
Specify which port channel to set the load balance
ndex(1-65535)
algorithm.
src-dest-mac
Global Configuration Mode
Using no form to reset the load balance algorithm to default.
switch(config)# port-channel load-balance src-dest-ip 1
dest-ip | src-dest-ip}