Ip Igmp Snooping Report-Suppression-Interval; Ip Igmp Snooping Retry-Count - TRENDnet TL2-E284 User Manual

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
Command
Syntax Description
Default Settings
Command Modes
User Guidelines
Example
Command History

ip igmp snooping report-suppression-interval

Command
Syntax Description
Default Settings
Command Modes
User Guidelines
Example
Command History

ip igmp snooping retry-count

32-5
ip igmp snooping report-forward {all-ports | router-ports}
no ip igmp snooping report-forward
all-ports
To forward IGMP reports to all ports.
router-ports
To forward IGMP reports to router ports.
Router ports
Global Configuration Mode
Using no form to reset the forwarding port to default.
switch(config)# ip igmp snooping report-forward all-ports
Version History
1.00.001 This command was introduced
To set the time interval that IGMPv2 report of the same group will not be
forwarded to the router ports
ip igmp snooping report-suppression-interval <(1 - 25) seconds>
no ip igmp snooping report-suppression-interval
(1-25) seconds
Specify the report suppression time interval.
5 seconds
Global Configuration Mode
Using no form to reset the time interval to default.
switch(config)# ip igmp snooping report-suppression-interval
10
Version History
1.00.001 This command was introduced
To set the maximum retries for group specific queries which sent to a port