Mstp Vlan Mapping; Mstp Port Settings; Mstp Cist Port Status - TRENDnet TL2-E284 User Manual

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
Click Apply to submit the changes.

MSTP VLAN Mapping

This page is to configure the MST Instance and VLAN mapping.
Parameter
MSTP Instance ID
Add VLAN
Delete VLAN
Click Add to submit the changes, Reset to clear the value.

MSTP Port Settings

This page is to configure the port related MSTP settings.
Parameter
Select
Port
MSTP Instance ID
Port State
Priority
Cost

MSTP CIST Port Status

To display the current MSTP CIST port status.
6-11
function, False to disable it. Default is false.
Figure 41 – Layer2 Management > MSTP > VLAN Mapping
Description
Specify which MST instance to be mapped.
Add a VLAN to the map list of this MST instance.
Delete a VLAN from the map list of this MST instance.
Figure 42 – Layer2 Management > MSTP > Port Settings
Description
Select a port to apply the changes.
Port ID.
Specify the MST instance IP of this port.
Specify the current state of this port.
Specify the spanning tree port priority. Possible value is 0-240. Default is 128.
Specify the path cost of the port. Possible value is 0-200000000. Default
200000000