Snmp Group - TRENDnet TL2-E284 User Manual

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
Command
Syntax Description
Default Settings
Command Modes
User Guidelines
Example
Command History

snmp group

Command
Syntax Description
17-4
snmp engineid <EngineIdentifier>
no snmp engineid
EngineIdentifier
80.00.08.1c.04.46.53
Global Configuration Mode
SNMP engine ID is unique for each switches
switch(config)# snmp engineid 80.00.08.1c.04.46.ae
Version History
1.00.001 This command was introduced
To create a SNMP group and the no form deletes the group
snmp group <GroupName> user <UserName> security-model {v1 |
v2c | v3 } [{volatile | nonvolatile}]
no snmp group <GroupName> user <UserName> security-model {v1
| v2c | v3 }
GroupName
user UserName
security-model v1
security-model v2c
security-model v3
volatile
nonvolatile
A string of between 5 and 32 octets expressed in
hexadecimal that is separated by dots
SNMP group name
Specify the user name
SNMP version 1 is to be used
SNMP version 2v is to be used
SNMP version 3 is to be used
Store in volatile memory
Store in nonvolatile memory