Show Interfaces Etherchannel - TRENDnet TL2-E284 User Manual

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
Command Modes
Example
Command History

show interfaces etherchannel

30-10
Privileged EXEC Mode
switch# show lacp 1 counters
LACPDUs
Port Sent Recv
------------------------------------------------
Channel group: 1
------------------
Gi0/1 788 704
Gi0/2 636 596
switch# show lacp 1 neighbor
Flags:
A - Device is in Active mode
P - Device is in Passive mode
Channel group 1 neighbors
Port Gi0/1
----------
Partner System ID : 08:01:02:03:04:05
Flags : P
LACP Partner Port Priority : 128
LACP Partner Oper Key : 2
LACP Partner Port State : 0x3c
Port State Flags Decode
------------------------
Activity : Passive
LACP Timeout : Long
Aggregation State : Aggregation, Sync, Collecting, Distributing
Port Gi0/2
----------
Partner System ID : 06:01:02:03:04:05
Flags : P
LACP Partner Port Priority : 128
LACP Partner Oper Key : 2
LACP Partner Port State : 0x3c
Port State Flags Decode
------------------------
Activity : Passive
LACP Timeout : Long
Aggregation State : Aggregation, Sync, Collecting, Distributing
Version History
1.00.001 This command was introduced
To display the etherchannel information of a port.
LACPDUs
Pkts Err
0 0
0 0