TRENDnet TL2-E284 User Manual page 212

Hide thumbs Also See for TL2-E284:
Table of Contents

Advertisement

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
Syntax Description
Default Settings
Command Modes
User Guidelines
Example
Command History
dot1x control-direction
Command
Syntax Description
Default Settings
Command Modes
User Guidelines
Example
Command History
31-4
ip-address
timeout 1-120
retransmit 1-254
key
secret-key-string
timeout – 3 seconds
retransmit – 3 times
Global Configuration Mode
When configure a RADIUS server without timeout and retransmit parameter,
system will apply the default values.
switch(config)# radius-server host 172.17.5.111 key trendnet
Version
History
1.00.001
This command was introduced
To choose the authentication control direction on ports.
dot1x control-direction {in | both}
no dot1x control-direction
in
Specify the the authentication control is only for ingress
packets.
both
Specify the the authentication control is for both ingress and
egress packets.
both
Interface Configuration Mode
Using no form the reset the control direction to default.
switch(config-if)# dot1x control-direction in
Version
History
1.00.001
This command was introduced
Specify the IP address of RADIUS server.
Specify the time period that a client waits for the
response from the RADIUS server before re-sending
the request.
The maximum number that a client re-sends the
request when there is no response from RADIUS
server.
The encryption key for the communication of RADIUS
server.

Advertisement

Table of Contents
loading

Table of Contents