Snmp View - TRENDnet TL2-E284 User Manual

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
Default Settings
Command Modes
Example
Command History

snmp view

Command
Syntax Description
17-7
passwd
priv DES passwd
volatile
nonvolatile
User
Authentication Protocol : None
Privacy Protocol
Storage Type
------------------------------
User
Authentication Protocol : None
Privacy Protocol
Storage Type
------------------------------
User
Authentication Protocol : None
Privacy Protocol
Storage Type
------------------------------
User
Authentication Protocol : MD5
Privacy Protocol
Storage Type
------------------------------
User
Authentication Protocol : SHA
Privacy Protocol
Storage Type
Global Configuration Mode
switch(config)# snmp user operator1
Version History
1.00.001 This command was introduced
To create a SNMP view which limits the range of MIB objects that a SNMP
administrator can access to. The no form deletes the SNMP view.
snmp view <ViewName> <OIDTree> [mask <OIDMask>] {included |
excluded} [{volatile | nonvolatile}]
no snmp view <ViewName> <OIDTree>
ViewName
SNMP view name
OIDTree
The object ID of MIB tree
mask OIDMask
The mask of OID
included
Includes the object in the list that the SNMP administrator can
access
Authentication password
Encryption password
Store in volatile memory
Store in nonvolatile memory
: initial
: None
: Non-volatile
: ReadOnly
: None
: Non-volatile
: ReadWrite
: None
: Non-volatile
: templateMD5
: None
: Non-volatile
: templateSHA
: DES_CBC
: Non-volatile