Ip Address Dhcp; Debug Ip Dhcp Client - TRENDnet TL2-E284 User Manual

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
Command Modes
User Guidelines
Example
Command History

ip address dhcp

Command
Command Modes
Example
Command History

debug ip dhcp client

Command
Syntax Description
Default Settings
Command Modes
User Guidelines
15-4
Interface Configuration Mode
The no form will delete the configured IP address.
switch(config-if)# ip address 20.0.0.1 255.0.0.0 20.0.0.254
Version History
1.00.001 This command was introduced.
To set the IP address of interface to be assigned by DHCP server.
ip address dhcp
Interface Configuration Mode
switch(config-if)#ip address dhcp
Version History
1.00.001 This command was introduced.
To enable the debug mode of DHCP client.
debug ip dhcp client { all | event | packets | errors | bind }
no debug ip dhcp client { all | event | packets | errors | bind }
all
Information of all DHCP client activities
event
Information of DHCP client events.
packets
Information of DHCP client packets
errors
Information of errors.
bind
Information of DHCP client binding.
Disabled
Privileged EXEC mode
This command is to enable the debug mode of DHCP client, and the no form is to
disable it.