Clear Spanning-Tree Counters; Debug Spanning-Tree - TRENDnet TL2-E284 User Manual

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
Example
Command History

clear spanning-tree counters

Command
Command Modes
Example
Command History

debug spanning-tree

Command
28-7
switch(config)# shutdown spanning-tree
Version History
1.00.001 This command was introduced
To clear the spanning tree counters.
clear spanning-tree counters
Global Configuration Mode
switch(config)# clear spanning-tree counters
Version History
1.00.001 This command was introduced
To enable the debug mode for spanning tree function.
debug spanning-tree { global | { all | errors | init-shut |
management | memory | bpdu | events | timer | state-machine
{ port-info |
role-transition | state-transition | protocol-migration |
topology-change | port-transmit
redundancy | sem-variables}}
no debug spanning-tree {global | {all | errors | init-shut |
management | memory | bpdu
{port-info |
role-transition | state-transition | protocol-migration |
topology-change | port-transmit | bridge-detection } redundancy
| sem-variables}}
port-recieve
|events | timer | state-machine
port-recieve |
| port-role-selection
| bridge-detection } |
port-role-selection
|
|