Sntp Daylight Saving Time - TRENDnet TL2-E284 User Manual

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
Parameter
Current Time
SNTP Status
SNTP Poll Interval in
Seconds (30-86400)
SNTP Primary Server
SNTP Secondary
Server
Time Zone Offset
(HH:MM)
Year:Month:Day
HH:MM:SS
Click Apply to submit the changes.

SNTP Daylight Saving Time

This page is to configure the daylight saving time function of system time setting.
Parameter
Daylight Saving Time
Status
Daylight Saving Time:
From
(Month:Day:HH:MM)
5-10
Figure 23 – System > SNTP > Time Settings
Description
Current system time.
To enable/disable the Simple Network Time Protocol (SNTP) function. Default
is disabled.
To set the time interval that SNTP synchronizes the time on SNTP server, and
the range is from 30 to 86400 seconds. Default is 30.
To set the primary SNTP server IP address.
To set the secondary SNTP server IP address.
To specify the difference of current time zone relative to GMT.
Specify current date
Specify current system time.
Figure 24 – System > SNTP > Daylight Saving Time
Description
To enable/disable the DST function. Default is disabled.
Specify the DST period in month:day:hour:minute.