Show Spanning-Tree Mst - TRENDnet TL2-E284 User Manual

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
Command Modes
User Guidelines
Example
Command History

show spanning-tree mst

Command
Syntax Description
Command Modes
User Guidelines
Example
29-5
Interface Configuration Mode
Use no form to reset the hello time value to default.
switch(config-if)# spanning-tree mst hello-time 1
Version History
1.00.001 This command was introduced
To display the information of MST instances.
show spanning-tree mst [<instance-id(1-64)>] [detail]
instance-id(1-64)
detail
Privileged EXEC Mode
System will display MST information for all instances when executing the
command without instance-id parameter.
switch# show spanning-tree mst 1
## MST01
Vlans mapped: 2
Bridge Address 00:50:ba:fd:51:49 Priority 32768
Root Address 00:50:ba:fd:51:49 Priority 32768
Root this switch for MST01
Interface Role Sts Cost Prio.Nbr Type
--------- ---- --- ---- -------- ----
Fa0/1 Master Forwarding 2000000 128.1 SharedLan
switch# show spanning-tree mst 1 detail
## MST01
Vlans mapped: 2
Bridge Address 00:50:ba:fd:51:49 Priority 32768
Root Address 00:50:ba:fd:51:49 Priority 32768
Root this switch for MST01
Fa0/1 of MST01 is Master , Forwarding
Port info port id 128.1 priority 128 cost 2000000
Designated root address 00:50:ba:fd:51:49 priority 32768 cost
0
Designated bridge address 00:50:ba:fd:51:49 priority 32768 port
id 128.1
Specify information of which MST instance to show.
Display more details of MST instance information.