Duplex; Flowcontrol - TRENDnet TL2-E284 User Manual

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
User Guidelines
Example
Command History

duplex

Command
Syntax Description
Default Settings
Command Modes
Example
Command History

flowcontrol

Command
Syntax Description
Default Settings
Command Modes
Example
25-3
The configured port speed and duplex settings only takes effect when
auto-negotiation disabled.
switch(config-if)# speed 100
Version History
1.00.001 This command was introduced
To set the port duplex mode.
duplex { full | half }
full
Port runs at full duplex mode.
half
Port runs at half duplex mode.
Full
Interface Configuration Mode
switch(config-if)# duplex half
Version History
1.00.001 This command was introduced
To enable/disable 802.3x flow control on ports.
flowcontrol { on | off }
on
Enable flow control.
off
Disable flow control.
Off
Interface Configuration Mode
switch(config-if)# flowcontrol on