Igmp Snooping Vlan Router Ports; Mac Based Multicast Forwarding Table; Static Mac Entries; Static Mac Address Configuration - TRENDnet TL2-E284 User Manual

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots

IGMP Snooping VLAN Router Ports

This page is to display the static and dynamic learned IGMP router ports of each VLAN.

MAC Based Multicast Forwarding Table

This page is to display the IGMP group MAC address was learned.

Static MAC Entries

Static MAC Address Configuration

This page is to create or configure static unicast MAC address in the L2 forwarding database.
Parameter
VLAN ID
MAC Address
Allowed Port
Status
Click Add to create a new static MAC, Reset to clear the value.
6-24
Figure 62 – Layer2 Management > IGMP Snooping > Router Ports
Figure 63 – Layer2 Management > IGMP Snooping > Group Information
Figure 64 – Layer2 Management > Static MAC Entries > Unicast Entries
Description
Specify the VLAN ID of the new MAC address entry.
Specify the MAC address if this new entry.
Specify the port allowed to forward the MAC address.
Specify the attribute of this static MAC. The options are:
Permanent - The static multicast will keep alive.
DeleteOnReset - The static multicast will be deleted after switch reset.
DeleteOnTimeout - The static multicast will be deleted when aging time out.
Default is Permanent.