Chapter 20 System Log Command; System Log Command List; Copy Logs; Logging - TRENDnet TL2-E284 User Manual

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots

System Log Command List

copy logs

Command
Syntax Description
Command Modes
User Guidelines
Example
Command History

logging

Command
20-1
System Log Command

copy logs

logging

mailserver

clear logs

show logging

show email alerts
Backup the system log to a remote tftp server
copy logs tftp://ip-address/filename
tftp://ip-address/filename
Global Configuration Mode
The maximum lengths of filename are 32 characters.
switch(config)# copy logs tftp://172.17.0.100/syslog1
Version History
1.00.001 This command was introduced
To configure the syslog server settings, and the no form resets all settings.
logging { <ip-address> | buffered <size (1-200)> | console
|facility {local0 | local1 | local2 | local3 | local4 | local5
| local6 | local7| } |trap [{ <level (0-7)> | alerts | critical
| debugging | emergencies | errors |informational | notification
| warnings }] | on }
no logging { <ip-address> | buffered | console | facility | trap
| on }
Chapter 20
The IP address the remote tftp server and
the name of the system log file to be
saved.