Log Server - TRENDnet TPE-3012LS User Manual

TRENDnet User's Guide
Recipients server UDP port number, if "use default"
Server Port
checked the value is 162, else user configure.
Specify the SNMP informs timeout, if "use default"
Timeout
checked the value is 15, else user configure.
Specify the SNMP informs retry count, if "use default"
Retry
checked the value is 3, else user configure.
© Copyright 2020 TRENDnet. All Rights Reserved.

Log Server

This section will allow users to configure an external remote log server or syslog server.
After you have completed configuration, click Add, Apply, and click Save.
Item Description
Server The IP address of the remote logging server.
Address
Server The port number of the remote logging server.
Ports
The facility of the logging messages. It can be one of the
Facility
following values: local0,local1, local2, local3, local4, local5,
local6, and local7.
The minimum severity.
•
Emergence: System is not usable.
•
Alert: Immediate action is needed.
Severity
•
Critical: System is in the critical condition.
•
Error: System is in error condition
•
Warning: System warning has occurred
has occurred.
•
•
Notice: System is functioning properly, but a system notice
Informational: Device information.
•
Debug: Provides detailed information about an event.
TPE-3012LS / TPE-3018LS
22