Chapter 17 Snmp Command; Snmp Command List; Snmp Access - TRENDnet TL2-E284 User Manual

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots

SNMP Command List

snmp access

Command
17-1

snmp access

snmp community

snmp engineid

snmp group

snmp trapinfo

snmp user

snmp view

snmp-server enable traps snmp authentication

snmp-server enable traps

snmp-server trap udp-port

snmp trap link-status

show snmp

show snmp community

show snmp engineID

show snmp group

show snmp group access

show snmp inform statistics

show snmp trapinfo

show snmp user

show snmp viewtree

show snmp-server traps
To configure the access settings of a SNMP group, and the no form removes the
group.
snmp access <GroupName> {v1 | v2c | v3 {auth | noauth | authpriv}}
[read <ReadView | none>] [write <WriteView | none>] [notify
<NotifyView | none>] [{volatile | nonvolatile}]
no snmp access <GroupName> {v1 | v2c | v3 {auth | noauth |
authpriv}}
Chapter 17
SNMP Command