Chapter 12 System Information Command; System Information Command List; System Name - TRENDnet TL2-E284 User Manual

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
System Information Command

System Information Command List

system name

Command
Syntax Description
Default Settings
Command Modes
User Guidelines
Example
Command History
12-1

system name

system contact

system location

system web-timeout

system cli-timeout

default ip address

default ip address allocation protocol

default mode

default restore

default restore-file

default vlan id

set ip http

ip http port

show system information

show nvram

show http server status

show ip information

show line console
To define the name of the Switch
system name <identify info>
identify info
A maximum of 15 characters is allowed. A NULL string is not
accepted.
SysName
Global Configuration Mode
This command defines the name of the Switch.
switch(config)# system name trendnet
Version History
1.00.001 This command was introduced.
Chapter 12