Table of Contents
Advertisement
TRENDnet User's Guide
Network
The network section allows you to configure your switch IPv4 and IPv6 address, default
gateway, and DNS server settings. Additionally, you can configure the date/time settings
and idle timeout settings.
Set your IPv4 settings
Network > IP Address
This section allows you to change your switch IPv4 address settings. Typically, the IP
address settings should be changed to match your existing network subnet in order to
access the switch management page on your network.
Default Switch IPv4 Address: 192.168.10.200
Default Switch IPv4 Subnet Mask: 255.255.255.0
1. Log into your switch management page (see
on page 11).
2. Click on Network and click on IP Address.
3. Review the settings. When you have completed making changes, click Apply to save
the settings.
• Address Type: Select Static to manually specify your IP address settings or
Dynamic to allow your switch to obtain IP address settings automatically from a
DHCP server on your network.
• IP Address: Enter the new switch IP address. (e.g. 192.168.200.200)
• Subnet Mask: Enter the new switch subnet mask. (e.g. 255.255.255.0)
• Default Gateway: Enter the default gateway IP address. (e.g. 192.168.200.1 or
typically your router/gateway to the Internet).
• DNS Server 1: Enter the primary IPv4 DNS server address.
• DNS Server 2: Enter the secondary IPv4 DNS server address.
© Copyright 2020 TRENDnet. All Rights Reserved.
"Access your switch management
page"
4. Click Apply.
5. In the top right, click Save to save the configuration settings to NV-RAM/startup
configuration.
6. Click OK.
TPE-3012LS / TPE-3018LS
42
Advertisement
Table of Contents
