System; System Management; Set Your System Information - TRENDnet TEG-S80ES User Manual

TRENDnet User's Guide

System

System Management

Set your system information

System > System Management
This section explains how to assign a name, location, and contact information for the
switch. This information helps in identifying each specific switch among other switches
in the same local area network. Entering this information is optional.
1. Log into your switch management page (see
on page 7).
2. Click on System, and click on System Management.
3. Review the settings. When you have completed making changes, click Apply to save
the settings.

System Name - Specifies a name for the switch, the name is optional and may
contain up to 15 characters.

System Location - Specifies the location of the switch. The location is optional
and may contain up to 30 characters.

System Contact - Specifies the name of the network administrator responsible
for managing the switch. This contact name is optional and may contain up to
30 characters.
4. Click Apply.
© Copyright 2018 TRENDnet. All Rights Reserved.
"Access your switch management page"
NOTE: The configured settings are only applied to the switch's temporary memory and
will be lost upon the next power-cycle. Please follow these next steps to save the
configurations to the switch's NV-RAM to ensure the settings will remain throughout
power-cycles and reboots:
1. From the menu on the left: click on Save, then click the blue button Save
Settings to Flash.
2. Click Continue to return to the Web Configuration of your switch.
TEG-S80ES
9