Port Isolation; Mirroring - TRENDnet TEG-3102WS User Manual

TRENDnet User's Guide
•
Description: This parameter offers the ability to name the device that's
connected to it

Port Isolation

Network > Physical Interface > Port Isolation
Port isolation prevents traffic from being sent between specific ports.
1. Log into your switch management page (see "Access your switch management page"
on page 5).
2. Click on Network, click on Physical Interface, and click on Port Isolation.
3. Select the port you would like to be edit. You may also select all ports by selecting All
column.
4. Select from the drop down menu to either Isolate or Not Isolate for the specified port
and click Apply to save your settings.
Note: This step saves all configuration changes to the NV-RAM to ensure that if the
switch is rebooted or power cycled, the configuration changes will still be applied.
© Copyright 2022 TRENDnet. All Rights Reserved.
Multi-Gig Web Smart Switch Series

Mirroring

Network > Physical Interface > Mirror
Port mirroring allows you to monitor the ingress and egress traffic on a port by having
the traffic copied to another port where a computer or device can be set up to capture
the data for monitoring and troubleshooting purposes.
1. Log into your switch management page (see "Access your switch management page"
on page 5).
2. Click on Network, then click on Physical Interface, and click on Mirror.
3. Review the settings. Click Apply to save changes.
•
Edit – Click to edit the selected session ID.
•
Session State – Click the drop-down and list and select one of the following
options:
o
Enable - This parameter activates the Port Mirroring feature and the
rest of the configuration parameters become active on the page.
o
Disable - This parameter de-activates the Port Mirroring feature and
the rest of the configuration parameters become inactive on the page.
•
Destination Port – Click the drop-down and list and select the port to send the
copied ingress/egress packets/data. (e.g. Computer or device with packet
capture or data analysis program.)
36