Installing Front Panel Emulation Software - Paradyne 3150 Operator's Manual

H. Front Panel Emulation

Installing Front Panel Emulation Software

The Front Panel Emulation software is supplied on a 3.5-inch diskette.
This software must be installed on a 386 or higher PC with Microsoft Windows
Release 3.1 or higher, MS-DOS 3.3 or higher, and at least 4 MB of RAM. A VGA
color monitor with VGA adapter (or higher resolution) is required. A mouse is also
required. The following procedures must be performed in the Windows
environment.
Procedure
To install Front Panel Emulation software:
H-2
1. Insert the diskette into the appropriate drive.
2. Select File from Program Manager.
3. Choose Run.
4. Type A:INSTALL and click OK.
5. An information screen appears. Choose Continue to continue the installation.
6. Type the letter of the destination drive, followed by a colon (default is C:), then
the appropriate directory name (default is C:\FRONTPAN).
If the selected directory already exists, the following message appears: The
specified directory already exists. Do you want to
overwrite the directory?
If the selected directory is new, the following message appears: The
specified directory does not exist. Do you want to create
the directory?
7. Select Yes. A confirmation screen appears. Select Install to continue the
installation.
8. A Setup Completed screen appears. Select Continue. The Program Manager
screen appears with the Front Panel icon.
March 2001 3150-A2-GB24-10