Paradyne 3150 Operator's Manual page 136

C. Configuration Options
Table C-4. User Interface Configuration Options (8 of 10)
C-14
MChar Len: 8
Next 7 8 Prev
Modem Character Length. Configures the character length (number of data bits) for the
modem port. This does not include the start bit (always 1) or the stop bits; 8 is the factory
default.
NOTES:
– This configuration option is available on standalone CSUs only.
– This option must be set to 8 to perform PC emulation or pass-through operations, or
SNMP management.
MParity: None
Next None Even Odd
Modem Parity. Configures the parity for the modem port. None is the factory default.
NOTE: This configuration option is available on standalone CSUs only.
MStop Bits: 1
Next 1 2 Prev
Modem Port Stop Bits. Configures the number of stop bits for the modem port; 1 is the
factory default.
NOTE: This configuration option is available on standalone CSUs only.
LSpaceDsc: Disab
Next Enab Disab Prev
Long Space Disconnect. Specifies how the modem disconnects a call. This makes call
disconnecting more robust and prevents invalid data at the remote modem if the call is
disconnected. To be effective, the remote modem must be configured to disconnect if it
detects continuous space.
NOTES:
– This configuration option is available on standalone CSUs only.
– This configuration option is not available if the modem port is configured as an
SNMP management link and the link is configured for synchronous operation.
MoInActTm: Disab
Next Enab Disab Prev
Modem Port Inactivity Timeout. Specifies whether the modem port disconnects after a
period of inactivity specified by the MoDiscTm configuration option.
–
Enab The modem port disconnects after the period of inactivity specified by the
MoDiscTm configuration option.
–
Disab The modem port does not disconnect due to inactivity.
NOTE: This configuration option is available on standalone CSUs only.
March 2001
Prev
3150-A2-GB24-10