Lamp Test; Starting A Lamp Test - Paradyne 3150 Operator's Manual

Lamp Test

Use the Lamp Test commands to start and stop a test of the CSU front panel LCD
and LEDs.

Starting a Lamp Test

Procedure
To start a Lamp test:
3150-A2-GB24-10
1. From the top-level menu screen, select Test.
2. From the Test screen, press the
the screen.
3. From the Test screen, select Lamp.
Test:
Lpbk Ptrns
F2
F1
4. From the Lamp Test screen, select Start.
Lamp Test:
Abort Start
F2
F1
5. The following screens alternately appear on the LCD until you press a
Function key to return to the Lamp Test screen. In addition, all LEDs blink.
F2
F1
0123456789 : ; < = > ?
@ABCDEFGHIJKLMNO
F1 F2
March 2001
key until the Lamp selection appears on
Lamp
F3
F3
F3
F3
8. Testing
8-15