Deactivating The Alarm Relay For Carrier-Mounted Csus - Paradyne 3150 Operator's Manual

Deactivating the Alarm Relay for Carrier-Mounted CSUs

The Alarm Cut-off command forces a deactivation of the alarm relay on the
3000 Series Carrier during an alarm condition. Since this function only affects the
3000 Series Carrier, it is only available for carrier-mounted CSUs. The alarm relay
function must first be enabled by the Alarm Relay configuration option (refer to
Appendix C, Configuration Options
Procedure
To deactivate the alarm relay:
3150-A2-GB24-10
1. From the top-level menu screen, press the
appears on the screen.
2. Select Ctrl.
3. From the Control screen, select ACO.
Control:
ACO Rel
F2
F1
4. The Command Complete screen appears.
Alarm Cut-Off:
Command Complete
F2
F1
March 2001
).
key until the Ctrl selection
LED
F3
F3
4. Configuration
4-25