Paradyne 3150 Operator's Manual page 69

Setting a Password
In addition to establishing access security on a port (refer to the previous section,
Establishing Access Security on a Port
Unless you specify otherwise, the password is null.
Procedure
To set a password:
3150-A2-GB24-10
1. From the top-level menu screen, press the
appears on the screen.
2. Select Ctrl.
3. From the Control screen, press the
on the screen.
4. Select Passwd.
Control:
Reset CID
F1 F2
5. Use the and keys to position the cursor under the desired character.
You must enter a character before the
to the right.
Passwd: xxxxxxxx
Up Down
F2
F1
6. Enter the desired password. Press F1 (Up) and F2 (Down) to scroll up and
down through the valid characters/numbers for the password. Valid password
characters are 0–9, a–z, A–Z, #, –, ., and /. Press F3 (Save) to save the
password.
Passwd: xxxxxxxx
Up Down
F2
F1
March 2001
on page 5-2) the password itself is set.
key until the Ctrl selection
key until the Passwd selection appears
Passwd
F3
moves the cursor to the next space
Save
F3
Save
F3
5. Security
5-3