Front Panel Indicators - Paradyne 6512 Installation Instructions Manual

Front Panel Indicators

All of the adapter's indicators turn on and off during the power-on self-test. After a
successful power-on self-test, the adapter's indicators should appear as indicated in
BOLD in the Condition column of the following table:
Indicator Condition Status
PWR
ALM
TST
LINE
ETHERNET
Troubleshooting Your Adapter
Refer to
Power – Green
PWR
TM
ON Power is applied to the adapter.
OFF No active alarms.
ON An alarm condition exists. Refer to
Adapter
OFF No active tests.
ON The TST indicator is on during the power-on self-test and
during testing initiated by your network service provider.
ON Your adapter is connected to your local phone company
and is ready to transmit and receive data.
OFF The link has not been established.
ON The Ethernet connection to your PC or Ethernet Hub is
made and your PC is ON.
OFF
No Ethernet device is detected.
Alarm – Red
Test – Yellow
ALM TST
on page 22.
on page 22 for indicators requiring action.
7
Line – Green
Ethernet – Green
LINE ETHERNET
Troubleshooting Your