Paradyne 3150 Operator's Manual page 171

System Group, MIB II
The System Group objects are fully supported by the CSU. The following sections
provide clarification for objects contained in the System Group where it is not
otherwise clear how the object definition in MIB II is related to the CSU. Objects
not mentioned are supported as stated in the MIB.
System Group – "sysDescr" Object (system 1)
This object provides the full name and version identification for the system
hardware and software. This object displays the following string:
[ Company Name ] T1 CSU; model xxxx-xx-xxx ; S/W Release: yy.yy.yy ; H/W CCA:
zzzz-zzz ; Serial number ssssssss.
System Group – "sysObjectID" Object (system 2)
This object provides the authoritative identification of the network management
subsystem contained in the unit. This object displays the following object identifier:
3150
3151
System group – "sysContact" Object (system 4)
This object provides a textual identification of the contact person for this managed
node.
System Group – "sysName" Object (system 5)
This object provides an administratively assigned name for this managed node.
System Group – "sysLocation" Object (system 6)
This object provides the physical location of this node.
3150-A2-GB24-10
Where:
xxxx-xx-xxx represents the full model number of the unit.
yy.yy.yy represents the software revision number of the unit.
zzzz-zzz represents the hardware revision number of the unit.
ssssssss represents the serial number of the unit.
[ Company OID ].1.14.2.1.1
[ Company OID ].1.14.2.1.2
March 2001
F. SNMP MIB Objects
F-3