Synchronous Port Table, Rs-232-Like Mib - Paradyne 3150 Operator's Manual

Asynchronous Port Table, "rs232AsyncPortStopBits"
(rs232AsyncPortEntry 3)
This object specifies the number of stop bits supported. Only the following values
are supported by the CSU.
T
T
T
Asynchronous Port Table, "rs232AsyncPortParity" (rs232AsyncPortEntry 4)
This object specifies the parity used by the port. Only the following values are
supported by the CSU.
T
T
T
Asynchronous Port Table, "rs232AsyncPortAutoBaud"
(rs232AsyncPortEntry 5)
This object specifies the ability to automatically sense the input speed of the port.
Only the following value is supported by the CSU.
T

Synchronous Port Table, RS-232-like MIB

The synchronous port table contains an entry for the MODEM or COM port when
the port is configured for synchronous operation. For the CSU, the entries in the
table that are counters (rs232SyncPortEntry 3–7) are used to collect statistics and
are not supported.
Synchronous Port Table – "rs232SyncPortClockSource"
(rs232SyncPortEntry 2)
This object specifies the clock source for the port. Only the following values are
supported by the CSU.
T
T
3150-A2-GB24-10
one(1) – One stop bit.
two(2) – Two stop bits. Supported on the COM and MODEM ports only.
one-and-half(3) – One and a half stop bits. Supported on the COM port only.
none(1) – No parity bit.
odd(2) – Odd parity. Supported on the COM and MODEM ports only.
even(3) – Even parity. Supported on the COM and MODEM ports only.
disabled(2) – Autobaud is not supported.
internal(1) – The port uses an internal clock.
external(2) – The port uses an external clock.
March 2001
F. SNMP MIB Objects
F-19