Paradyne 3150 Operator's Manual page 86

7. Monitoring and Troubleshooting
Self-Test Health Messages
Use the Self-Test Health command to display the results of the power-on self-test.
Possible messages are listed in
Chapter 2, Installation
Procedure
To display power-on self-test results:
7-2
, for more information about power-on self-test.
1. From the top-level menu screen, select Stat.
CSU ESF
Stat Test
F1 F2
2. From the Status screen, select STest.
Status:
DevHS STest
F1 F2
3. View the results of the last power-on self-test. If no problems were found
during power-on, the following message appears.
STest Health:
Passed
F1 F2
March 2001
Table 7-1, Self-Test Health
Cnfig
F3
Perf
F3
F3
Messages. See
3150-A2-GB24-10