Changing Configuration Options
Use the Configuration branch of the main menu to display or change CSU
configuration options. Refer to
Configuration , and
If the access level is not Level 1, the message Access level is 2,
Configuration is read-only appears on line 24.
Displaying or Editing Configuration Options
Procedure
To display or edit configuration options:
Figure I-5.
3150-A2-GB24-10
Appendix C, Configuration Options
1. From the Main Menu screen, select Configuration.
The Load Configuration From screen appears
Screen).
2. From the Load Configuration From screen, select a configuration option set to
load (Current, Customer, Default Factory 1, or Default Factory 2). You
cannot edit the Default Factory configuration options, but you can display
them.
After selecting the set of configuration options to load, the Configuration
Edit/Display screen appears
3. Select a functional group to display or edit.
main/config
Customer ID: Node A
Slot:
xx
--------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu
Configuration Load Screen
March 2001
I. Asynchronous Terminal Interface Operation
Changing Configuration Options
(Figure I-5, Configuration Load
(Figure I-6, Configuration Edit/Display
LOAD CONFIGURATION FROM:
Current Configuration
Customer Configuration 1
Customer COnfiguration 2
Default Factory Configuration 1
Default Factory Configuration 2
in Chapter 4,
.
Screen).
Model: 31xx
MainMenu
Exit
I-9