Paradyne 3150 Operator's Manual page 34

3. Using the Front Panel
Table 3-2.
3-6
Network Interface LEDs
Name Color Meaning
SIG Green Monitors the signal being received from the network.
ON: A recoverable signal is being received from the network.
OFF: The signal cannot be recovered from the network (a Loss of
Signal condition exists).
OOF Yellow Monitors Out Of Frame (OOF) conditions on the received network
signal.
ON : At least one OOF was detected on the signal during the
sampling period.
OFF: No OOFs were detected on the signal during the sampling
period.
ALRM Yellow Indicates whether an alarm condition exists on the received network
signal.
ON: An alarm condition (LOS, LOF, EER, Yellow, AIS) exists on the
received network signal. Use the Device Health and Status
command to determine the alarm type.
OFF: No alarm condition exists on the network interface signal.
EER Yellow Indicates the Excessive Error Rate (EER) has been exceeded on the
network interface.
NOTE: This LED is only valid when ESF framing is being used.
ON: The EER has been exceeded on the network interface.
OFF: The EER has not been exceeded on the network interface.
March 2001 3150-A2-GB24-10