Starting Front Panel Emulation - Paradyne 3150 Operator's Manual

Starting Front Panel Emulation

If the CSU selected is not locally attached to the PC, you must first dial to the
remote CSU before starting front panel emulation. The modem attached to the PC
must support AT commands for the Front Panel Emulation software to successfully
place the call.
Procedure
To start front panel emulation:
3150-A2-GB24-10
1. From the PC, open Program Manager from Windows.
2. Double-click on the Front Panel icon that appears after the Front Panel
Emulation program is installed on the PC. The Front Panel window opens.
3. Double-click on the Front Panel icon that appears in the Front Panel window.
The Front Panel Emulation screen appears.
4. Enter the Com Port and Speed from the drop-down selection list boxes.
The Com Port field needs to contain the actual communications port name as
recorded in the Windows information file (INI).
The Speed field needs to contain one of the following communications
speeds: 1200, 2400, 4800, 9600, 14400, 19200, or 38400 and should match
the CSU's COM port configuration.
March 2001
H. Front Panel Emulation
H-3