Front Panel Emulation - Paradyne 3150 Operator's Manual

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installing Front Panel Emulation Software
Starting Front Panel Emulation
Overview
The CSU offers functionality through Front Panel
Emulation software that is similar to that provided by the
CSU front panel. The CSU can either be locally or
remotely attached to a 386 or higher PC that has at least
4 MB of RAM. A copy of the CSU front panel appears on
the PC. The functionality of the front panel is available by
clicking on the Function keys with the mouse rather than
by pressing keys from the actual front panel.
For carrier-mounted CSUs, a single PC is used to
access all of the slots in the carrier. The PC is connected
locally to a single slot containing either a 3151 CSU or
3161 DSU/CSU that has been configured to enable a
shared COM port on the Auxiliary Backplane. The
attached PC can access any 3151/3161 device attached to
the Auxiliary Backplane. For more information about
using the COM port on the carrier, refer to the
ACCULINK 3151 CSU and 3161 DSU/CSU General
Information Guide.
3150-A2-GB21-80

Front Panel Emulation

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installing Front Panel
Emulation Software
3.5-inch, 1.44 MB, double-sided, high-density,
write-protected diskette, with 15 sectors per track,
80 tracks per side, and 96 tracks per inch.
with Microsoft Windows Release 3.1 or higher, MS-DOS
3.3 or higher, and at least 4 MB of RAM. A VGA color
monitor with VGA adapter (or higher resolution) is
required. A mouse is also required. The following
procedures must be performed in the Windows
environment.
February 1998
The Front Panel Emulation software is supplied on a
This software must be installed on a 386 or higher PC
To install Front Panel Emulation software,
1. Insert the diskette into the appropriate drive.
2. Select File from Program Manager.
3. Choose Run.
4. Type A:INSTALL and click OK.
5. An Information screen appears. Choose Continue
to continue the installation.
G
G-1
G-1
G-2
G-1