Paradyne 3150 Operator's Manual page 230

Index
community name
configuration option, C-22
procedure for configuring, 4-17
configuration options
procedure for changing, 4-3
tables
Alarm, C-17
DTE Interface, C-2
General, C-6
Network Interface, C-3
SNMP, C-21
User Interface, C-7
worksheets, D-1
connectors
10BaseT port, E-6
COM port, E-7
DTE port, E-4
Modem port, E-5
Network port, E-2
rear panel
cabling examples, 2-5
functional description, 1-4
physical description, 1-4
pin assignments, E-1
CPU failure message, 7-3
CRC Passthrough configuration option, C-5
crossover cable, E-9
Ctrl (Control) branch
examples of use, 3-11, 4-2, 4-25, 5-3, 5-6, 6-2,
6-5–6-7, 7-8
in the menu tree, A-1
Cust1 (Customer 1) configuration area
functional description, 4-3
in the menu tree, A-1
Cust2 (Customer 2) configuration area
functional description, 4-3
in the menu tree, A-1
Customer ID
setting through the front panel, 4-2
cyclic redundancy check (CRC)
error indication, 7-9
D
database
SNMP, 1-2
default configuration options, C-1
default gateway
setting from front panel, 4-10
DevFail (Device Failure) message, 7-5
DevHS (Device Health and Status) branch
example of use, 7-4
in the menu tree, A-1
IN-2
Dial command, 6-6
dimensions, B-2
Disconnect command, 6-7
DL (Download) branch
in the menu tree, A-1
operation, 3-11
DSX-1 port
functional description, 1-4
DTE Configuration branch
in the menu tree, A-1
option table, C-2
option worksheet, D-2
DTE interface
configuration options, C-2
failure message, 7-3
front panel LED indications, 3-7
functional description, 1-4–2-1
managed by SNMP, F-1
physical description, 1-4
pin assignments, E-4
technical specifications, B-1
troubleshooting, 7-15
DTE loopback (DLB), 8-9
configuration option, C-2
external control interface, E-4
E
EER (Excessive Error Rate) condition
ASCII terminal/printer message, 7-12
Device Health and Status message, 7-5
front panel LED indication, 3-6
Performance Report message, 7-10
troubleshooting, 7-15
enterprise-specific trap, 7-13
environmental specifications, B-2
equalization
line, C-2
equipment list, J-1
error messages. See messages, alarm
ES (Errored Seconds) report, 7-9
Ethernet port
configuring, 4-7
connector, E-6
IP address, 4-8, C-15
protocol, C-15
statistics, 7-11
examples
application, 2-1
cabling, 2-5
SNMP and Telnet, 2-2
external modem interface, E-9
March 2001 3150-A2-GB24-10