8. Testing
Aborting a Lamp Test
Procedure
To abort the Lamp test:
8-16
6. When you are satisfied that all LEDs are lighting and the LCD is functioning
properly, abort the Lamp test from the Lamp Test screen. If there is no activity
on the CSU front panel for five minutes, the Device Health and Status screen
appears automatically. However, the Lamp test remains active until it is
aborted.
1. Display the Lamp Test screen. To do this when the LCD is alternating the
Lamp test screens, press any Function key. Otherwise, follow
Step 3
on page 8-15 for starting a Lamp test.
Lamp Test:
Abort
Start
F1
F2
2. From the Lamp Test screen, select Abort.
Lamp Test:
Abort
Start
F1
F2
March 2001
F3
F3
Step 1
through
3150-A2-GB24-10